Inconel® Alloy X750 is a nickel-chromium alloy that is precipitation hardenable and possesses high strength and corrosion resistance at elevated temperatures.
組成 | UNS N07750 % |
炭素 | 0.08 (最大) |
マンガン | 0.35 max |
硫黄 | 0.01 (最大) |
シリコン | 0.35 max |
クロム | 14.0 - 17.0 |
ニオブ | 0.70 - 1.20 |
チタン | 2.25 - 2.75 |
アルミニウム | 0.40 - 1.00 |
鉄 | 5.00 - 9.00 |
コバルト | 1 max |
タンタル | 0.05 (最大) |
銅 | 0.50 (最大) |
Nickel + Cobalt | 70.00 min |
メートル法 | 英語 | |
密度 | 8.28 g/cm³ | 0.299 lbs/in³ |
Modulus of elasticity | 214 GPa | 31 MPsi |
Electrical resistivity | 1.22 µohms/m | 734 µohms/ft |
Thermal conductivity | 12.0 W/m-K | 83 Btu-in/ft²hr-°F |
Cold worked % | Yield strength | Ultimate tensile strength | Elongation % |
0 | 393 MPa [57 ksi] | 855 MPa [124 ksi] | 38 |
20 | 655 MPa [95 ksi] | 1007 MPa [146 ksi] | 19.3 |
50 | 1193 MPa [173 ksi] | 1303 MPa [189 ksi] | 2.3 |
60 | 1289 MPa [187 ksi] | 1462 MPa [212 ksi] | 1.8 |
68 | 1310 MPa [190 ksi] | 1538 MPa [223 ksi] | 1.8 |
75 | 1310 MPa [190 ksi] | 1586 MPa [230 ksi] | 1.9 |
All data represent results from a 25.4 cm [10 in] test gauge length. Values are typical and may not represent all diameters. Test method will affect results.